The Paloalto Networks Palo Alto Networks Certified Network Security Engineer 7 exam PCNSE7 is a 90 minute assessment with 176 questions. Likewise, the Paloalto Networks PCNSE7 Paloalto Networks Certified Network Security Engineer certification exam verifies the candidate's acquaintance and core understanding with the Data Security Administration and Network Security. Paloalto Networks 90 exam is associated with the Paloalto Networks Certified Network Security Engineer Certification. Paloalto Networks 90 Exam helps you to upgrade credential, as the content is aligned with the exam topics;
- Architecture and Design,
- Core Concepts,
- Logs and Stats.
Exam Code: PCNSE7
Exam Name: Palo Alto Networks Certified Network Security Engineer 7
Exam Vendor: Paloalto Networks
Question: 1
A host attached to Ethernet 1/4 cannot ping the default gateway. The widget on the dashboard shows Ethernet 1/1 and Ethernet 1/4 to be green. The IP address of Ethernet 1/1 is 192.168.1.7 and the IP address of Ethernet 1/4 is 10.1.1.7. The default gateway is attached to Ethernet 1/1. A default route is properly configured.
What can be the cause of this problem?
A. No Zone has been configured on Ethernet 1/4.
B. Interface Ethernet 1/1 is in Virtual Wire Mode.
C. DNS has not been properly configured on the firewall.
D. DNS has not been properly configured on the host.
Answer: A
Question: 2
Site-A and Site-B have a site-to-site VPN set up between them. OSPF is configured to dynamically create the routes between the sites. The OSPF configuration in Site-A is configured properly, but the route for the tunnel is not being established. The Site-B interfaces in the graphic are using a broadcast Link Type. The administrator has determined that the OSPF configuration in Site-B is using the wrong Link Type for one of its interfaces.
Which Link Typesetting will correct the error?
A. Set tunnel. 1 to p2p
B. Set tunnel. 1 to p2mp
C. Set Ethernet 1/1 to p2mp
D. Set Ethernet 1/1 to p2p
Answer: A
Question: 3
Given the following table.
Which configuration change on the firewall would cause it to use 10.66.24.88 as the next hop for the 192.168.93.0/30 network?
A. Configuring the Administrative Distance for a RIP to be lower than that of OSPF Int.
B. Configuring the metric for a RIP to be higher than that of OSPF Int.
C. Configuring the Administrative Distance for a RIP to be higher than that of OSPF Ext.
D. Configuring the metric for a RIP to be lower than that OSPF Ext.
Answer: A
Question: 4
A VPN connection is set up between Site-A and Site-B, but no traffic is passing in the system log of Site-A, there is an event logged as like-nego-p1-fail-psk.
What action will bring the VPN up and allow traffic to start passing between the sites?
A. Change the Site-B IKE Gateway profile version to match Site-A,
B. Change the Site-A IKE Gateway profile exchange mode to aggressive mode.
C. Enable NAT Traversal on the Site-A IKE Gateway profile.
D. Change the pre-shared key of Site-B to match the pre-shared key of Site-A
Answer: D
Question: 5
A company is upgrading its existing Palo Alto Networks firewall from version 7.0.1 to 7.0.4.
Which three methods can the firewall administrator use to install PAN-OS 7.0.4 across the enterprise? ( Choose three)
A. Download PAN-OS 7.0.4 files from the support site and install them on each firewall after manually uploading.
B. Download PAN-OS 7.0.4 to a USB drive and the firewall will automatically update after the USB drive is inserted in the firewall.
C. Push the PAN-OS 7.0.4 updates from the support site to install on each firewall.
D. Push the PAN-OS 7.0.4 update from one firewall to all of the other remaining after updating one firewall.
E. Download and install PAN-OS 7.0.4 directly on each firewall.
F. Download and push PAN-OS 7.0.4 from Panorama to each firewall.
Answer: ACF
Question: 6
A logging infrastructure may need to handle more than 10,000 logs per second.
Which two options support a dedicated log collector function? (Choose two)
A. Panorama virtual appliance on ESX(i) only
B. M-500
C. M-100 with Panorama installed
D. M-100
Answer: BC
Question: 7
Which three fields can be included in a pcap filter? (Choose three)
A. Egress interface
B. Source IP
C. Rule number
D. Destination IP
E. Ingress interface
Answer: B,C,D
Question: 8
A company hosts a publically accessible web server behind a Palo Alto Networks next-generation firewall with the following configuration information.
Users outside the company are in the "Untrust-L3" zone
The web server physically resides in the "Trust-L3" zone.
Web server public IP address: 23.54.6.10
Web server private IP address: 192.168.1.10
Which two items must be NAT policy contain to allow users in the untrust-L3 zone to access the web server? (Choose two)
A. Untrust-L3 for both Source and Destination zone
B. Destination IP of 192.168.1.10
C. Untrust-L3 for Source Zone and Trust-L3 for Destination Zone
D. Destination IP of 23.54.6.10
Answer: C,D
Question: 9
A network engineer has revived a report of problems reaching 98.139.183.24 through vr1 on the firewall. The routing table on this firewall is extensive and complex.
Which CLI command will help identify the issue?
A. test routing fib virtual-router vr1
B. show routing route type static destination 98.139.183.24
C. test routing fib-lookup IP 98.139.183.24 virtual-router vr1
D. show routing interface
Answer: C
Question: 10
A network Administrator needs to view the default action for a specific spyware signature. The administrator follows the tabs and menus through Objects> Security Profiles> Anti-Spyware and selects default profile.
What should be done next?
A. Click the simple-critical rule and then click the Action drop-down list.
B. Click the Exceptions tab and then click show all signatures.
C. View the default actions displayed in the Action column.
D. Click the Rules tab and then look for rules with "default" in the Action column.
Answer: B
For More Question and Answers with Explanation Click this URL:
No comments:
Post a Comment